함수발생기, 주파수측정기, 전원공급기, 멀티미터의 4가지 기능이 1개의 제품에 내장
2MHz 함수발생기
1GHz 주파수 측정기
1GHz 주파수 측정기
3 1/2 digit 디지털 멀티 미터
0~30V/3A 2채널, 5V/2A 고정출력 1채널 DC전원 공급기
컴팩트한 디자인으로 작업대 공간 절약
학교실습장비에서 생산라인, 연구소에 까지 폭 넓게 사용가능
조작이 간단하고 쉬움
부속품 : BNC to BNC 케이블 x 1,
바나나잭-악어클립 케이블(적/흑) x 1
사용설명서 x 1,
전원코드 x 1,
휴즈 x 1
This manual contains all the information required to install, operate and use the ALL-IN-ONE Instrument.(MODEL : US-9123D)
Section 1 covers instrument identification, description, accessories, specifi- cations and other basic informations.
Section 1 covers instrument identification, description, accessories, specifi- cations and other basic informations.
1.2 SPECIFICATIONS
1.2.1 FREQUENCY COUNTER SECTION
․ Input Characteristics
- Sensitivity
1Hz ~ 100MHz : 25mVrms
70MHz ~ 1GHz : 30mVrms
․ Input Impedance : 1MΩ/100pF
․ Damage Level : AC & DC X1 : 15Vrms
AC & DC X10 : 150Vrms
(Pushed ATT. S/W)
․ Frequency range : 1Hz ~ 1000MHz
․ Resolution : 0.1, 1, 10, 100Hz
․ Gate Time : 10S, 1S, 100mS, 10mS
․ Accuracy : ±(1Hz +1 DIGIT + Time Base Error)
․ Standard Time Base
- Frequency : 10MHz
- Stability : 5 ppm(0℃~40℃)
- Aging Change : 5 ppm/year
․ Display : 8 Digits LED with unit annunciation
․ Input Characteristics
- Sensitivity
1Hz ~ 100MHz : 25mVrms
70MHz ~ 1GHz : 30mVrms
․ Input Impedance : 1MΩ/100pF
․ Damage Level : AC & DC X1 : 15Vrms
AC & DC X10 : 150Vrms
(Pushed ATT. S/W)
․ Frequency range : 1Hz ~ 1000MHz
․ Resolution : 0.1, 1, 10, 100Hz
․ Gate Time : 10S, 1S, 100mS, 10mS
․ Accuracy : ±(1Hz +1 DIGIT + Time Base Error)
․ Standard Time Base
- Frequency : 10MHz
- Stability : 5 ppm(0℃~40℃)
- Aging Change : 5 ppm/year
․ Display : 8 Digits LED with unit annunciation
1.2.2 FUNCTION GENERATOR SECTION
․ Wave Forms
Sine, Square, triangle, Skewed Sine, Ramp, Pulse, TTL Level Square
․ Output Frequency Range : 0.02Hz ~ 2MHz(7 Range)
․ VCF Voltage Input : 0 ~ 10V DC(Max : ±20V)
․ Output(All Waveforms)
- Impedance : 50Ω±10%
600Ω±10%(up to 100KHz)
- Connector : BNC
- Amplitude(without attenuation)
2Vpp ~ 20Vpp(Open load)
- Attenuator : -20dB
- Frequency Variable Range : 100 : 1 or more
- Symmetry Variable Range : 10 : 1 or more
※ Sine Wave
- Distortion : Less than 1% (at 100KHz)
- Harmonics
More than 25dB below fundamental frequency(100KHz to 500KHz)
More than 20dB below fundamental frequency(500KHz to 2MHz)
- Flatness : ±0.3dB inner(at Max Output)
※ Square Wave
- Symmetry : Less than±3%(at 1KHz)
- Rise & Fall Time : Less than 150ns(at 1KHz)
※ Triangle Wave
- Linearity : Less than 1% (up to 100KHz)
Less than 5% (100KHz to 2MHz)
※ TTL output
- Rise & Fall Time : Less than 30ns(at 1KHz)
- Output Level : More than 3V
Sine, Square, triangle, Skewed Sine, Ramp, Pulse, TTL Level Square
․ Output Frequency Range : 0.02Hz ~ 2MHz(7 Range)
․ VCF Voltage Input : 0 ~ 10V DC(Max : ±20V)
․ Output(All Waveforms)
- Impedance : 50Ω±10%
600Ω±10%(up to 100KHz)
- Connector : BNC
- Amplitude(without attenuation)
2Vpp ~ 20Vpp(Open load)
- Attenuator : -20dB
- Frequency Variable Range : 100 : 1 or more
- Symmetry Variable Range : 10 : 1 or more
※ Sine Wave
- Distortion : Less than 1% (at 100KHz)
- Harmonics
More than 25dB below fundamental frequency(100KHz to 500KHz)
More than 20dB below fundamental frequency(500KHz to 2MHz)
- Flatness : ±0.3dB inner(at Max Output)
※ Square Wave
- Symmetry : Less than±3%(at 1KHz)
- Rise & Fall Time : Less than 150ns(at 1KHz)
※ Triangle Wave
- Linearity : Less than 1% (up to 100KHz)
Less than 5% (100KHz to 2MHz)
※ TTL output
- Rise & Fall Time : Less than 30ns(at 1KHz)
- Output Level : More than 3V
※ Frequency Sweep
- Sweep Time : 20ms to 2s
- Internal Sweep Mode
Linear
Logarithmic
- Sweep width : More than 100 : 1
- External Sweep by means of VCF Input
- Sweep Time : 20ms to 2s
- Internal Sweep Mode
Linear
Logarithmic
- Sweep width : More than 100 : 1
- External Sweep by means of VCF Input
1.2.3 DIGITAL MULTIMETER SECTION
․ Display : 3 1/2 Digits LCD Display
․ Auto Ranging Selector
․ Basic Measurement : DCV, ACV, Ω(((․))), DCA, ACA
․ Measured Value Hold Function
․ Memory Mode for Zero Ohm Adjustment and Relative Continuity-Check with Audible Alarm
․ Full Overload Protection
․ Input Impedance : 10MΩ
․ Auto Ranging Selector
․ Basic Measurement : DCV, ACV, Ω(((․))), DCA, ACA
․ Measured Value Hold Function
․ Memory Mode for Zero Ohm Adjustment and Relative Continuity-Check with Audible Alarm
․ Full Overload Protection
․ Input Impedance : 10MΩ
※ Resistance Accuracy
RangeResolutionAccuracyRemarks200Ω0.1Ω±(0.8% + 4digits)Only high power Ohm2KΩ1Ω20KΩ10ΩHigh power and Low power ohm available200KΩ100Ω2MΩ1KΩ±(1.5% + 5digits)Overload protection : 500 VDC or 350 VAC rms
※ DC Voltage Accuracy
RangeResolutionAccuracy200mV100μV±(0.25% + 2 digits)2V1mV±(0.8% + 4 digits)20V10mV200V100mV1000V1VOverload Protection : 1100V DC Max(60sec) or AC peck
※ AC Voltage Accuracy
RangeResolutionAccuracy2V1mV±(1.2% + 3 digits)20V10mV200V100mV750V1V±(1.5% + 5 digits)Overload Protection : 1100V DC Max(60sec) or AC peak
※ DC Current Accuracy
RangeResolutionAccuracy200mA100μA±(1.0% + 5 digits)10A10mA±(1.5% + 5 digits) Overload Protection : 400mA Max(60sec, fused)
13A Max(40sec, Unfused)
※ AC Current Accuracy
RangeResolutionAccuracy200mA100μA±(1.0% + 5 digits)10A10mA±(2.0% + 5 digits) Overload Protection : 400mA Max(60sec, fused)
13A Max(40sec, Unfused)
RangeResolutionAccuracyRemarks200Ω0.1Ω±(0.8% + 4digits)Only high power Ohm2KΩ1Ω20KΩ10ΩHigh power and Low power ohm available200KΩ100Ω2MΩ1KΩ±(1.5% + 5digits)Overload protection : 500 VDC or 350 VAC rms
※ DC Voltage Accuracy
RangeResolutionAccuracy200mV100μV±(0.25% + 2 digits)2V1mV±(0.8% + 4 digits)20V10mV200V100mV1000V1VOverload Protection : 1100V DC Max(60sec) or AC peck
※ AC Voltage Accuracy
RangeResolutionAccuracy2V1mV±(1.2% + 3 digits)20V10mV200V100mV750V1V±(1.5% + 5 digits)Overload Protection : 1100V DC Max(60sec) or AC peak
※ DC Current Accuracy
RangeResolutionAccuracy200mA100μA±(1.0% + 5 digits)10A10mA±(1.5% + 5 digits) Overload Protection : 400mA Max(60sec, fused)
13A Max(40sec, Unfused)
※ AC Current Accuracy
RangeResolutionAccuracy200mA100μA±(1.0% + 5 digits)10A10mA±(2.0% + 5 digits) Overload Protection : 400mA Max(60sec, fused)
13A Max(40sec, Unfused)
1.2.4 POWER SUPPLY SECTION
OUTPUT
ITEMOUTPUT #1OUTPUT #2OUTPUT #3 Output Voltage0~30V0~30V5V Fixed Output Current0~3A0~3A2A Ripple1mV Max1mV Max2mV Max Load Regulation0.01% + 5mV0.01% + 5mV40mV Line Regulation0.01% + 5mV0.01% + 5mV30mV Current Limit3A, Trip3A, Trip2.2A Fold Back Display3 1/2 digits LCD, Voltage and Current display3 1/2 digits LCD, Voltage and current displayTurn on LED
OUTPUT
ITEMOUTPUT #1OUTPUT #2OUTPUT #3 Output Voltage0~30V0~30V5V Fixed Output Current0~3A0~3A2A Ripple1mV Max1mV Max2mV Max Load Regulation0.01% + 5mV0.01% + 5mV40mV Line Regulation0.01% + 5mV0.01% + 5mV30mV Current Limit3A, Trip3A, Trip2.2A Fold Back Display3 1/2 digits LCD, Voltage and Current display3 1/2 digits LCD, Voltage and current displayTurn on LED
1.2.5 GENERAL SPECIFICATIONS
․ Operating Environment
- Temperature : 0℃ ~ 40℃
- Relative Humidity : 〈 85%
․ Storage Temperature : -20℃ ~ 70℃
․ Power Requirements :
100/120/220/240 VAC ± 10%, 50/60Hz
180VA with Full Loaded Power Supply
․ Size : 375(W) X 160(H) X 340(D)mm
․ Weight : 13kg
---------------------------------------------------------------------------------------
제품문의
담당자 : 영업부 박한상 부장
문의처: Tel 032-327-3344 / Fax 032-327-3348
e-mail : sales@anypa.com / salesman@anypa.com
e-mail : sales@anypa.com / salesman@anypa.com
댓글 없음:
댓글 쓰기